Guide for running C# Azure Functions in the isolated worker model

This article is an introduction to working with Azure Functions in .NET, using the isolated worker model. This model allows your project to target versions of .NET independently of other runtime components. For information about specific .NET versions supported, see supported version.

Use the following links to get started right away building .NET isolated worker model functions.

To learn just about deploying an isolated worker model project to Azure, see Deploy to Azure Functions.

Benefits of the isolated worker model

There are two modes in which you can run your .NET class library functions: either in the same process as the Functions host runtime (in-process) or in an isolated worker process. When your .NET functions run in an isolated worker process, you can take advantage of the following benefits:

• Fewer conflicts: Because your functions run in a separate process, assemblies used in your app don't conflict with different versions of the same assemblies used by the host process.
• Full control of the process: You control the start-up of the app, which means that you can manage the configurations used and the middleware started.
• Standard dependency injection: Because you have full control of the process, you can use current .NET behaviors for dependency injection and incorporating middleware into your function app.
• .NET version flexibility: Running outside of the host process means that your functions can run on versions of .NET not natively supported by the Functions runtime, including the .NET Framework.

If you have an existing C# function app that runs in-process, you need to migrate your app to take advantage of these benefits. For more information, see Migrate .NET apps from the in-process model to the isolated worker model.

For a comprehensive comparison between the two modes, see Differences between in-process and isolate worker process .NET Azure Functions.

Supported versions

Versions of the Functions runtime work with specific versions of .NET. To learn more about Functions versions, see Azure Functions runtime versions overview. Version support depends on whether your functions run in-process or out-of-process (isolated).

The following table shows the highest level of .NET Core or .NET Framework that can be used with a specific version of Functions.

¹ Build process also requires .NET 6 SDK. Support for .NET Framework 4.8 is in GA.

² Build process also requires .NET Core 3.1 SDK.

³ For details, see Functions v2.x considerations.

For the latest news about Azure Functions releases, including the removal of specific older minor versions, monitor Azure App Service announcements.

Project structure

A .NET project for Azure Functions using the isolated worker model is basically a .NET console app project that targets a supported .NET runtime. The following are the basic files required in any .NET isolated project:

• C# project file (.csproj) that defines the project and dependencies.
• Program.cs file that's the entry point for the app.
• Any code files defining your functions.
• host.json file that defines configuration shared by functions in your project.
• local.settings.json file that defines environment variables used by your project when run locally on your machine.

For complete examples, see the .NET 8 sample project and the .NET Framework 4.8 sample project.

Package references

A .NET project for Azure Functions using the isolated worker model uses a unique set of packages, for both core functionality and binding extensions.

Core packages

The following packages are required to run your .NET functions in an isolated worker process:

• Microsoft.Azure.Functions.Worker
• Microsoft.Azure.Functions.Worker.Sdk

Version 2.x (Preview)

The 2.x versions of the core packages change the supported framework assets and bring in support for new .NET APIs from these later versions. When using .NET 9 (Preview) or later, your app needs to reference version 2.0.0-preview1 or later of both packages.

The initial preview versions are compatible with code written against version 1.x. However, during the preview period, newer versions may introduce behavior changes that could influence the code you write.

When updating to the 2.x versions, please note the following changes:

• Starting with version 2.0.0-preview2, Microsoft.Azure.Functions.Worker.Sdk adds default configurations for SDK container builds.

Extension packages

Because .NET isolated worker process functions use different binding types, they require a unique set of binding extension packages.

You find these extension packages under Microsoft.Azure.Functions.Worker.Extensions.

Start-up and configuration

When using .NET isolated functions, you have access to the start-up of your function app, which is usually in Program.cs. You're responsible for creating and starting your own host instance. As such, you also have direct access to the configuration pipeline for your app. With .NET Functions isolated worker process, you can much more easily add configurations, inject dependencies, and run your own middleware.

The following code shows an example of a HostBuilder pipeline:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System.Linq;
using System.Threading.Tasks;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
using Microsoft.Extensions.Logging;

namespace FunctionApp
{
    class Program
    {
        static async Task Main(string[] args)
        {
            // #if DEBUG
            //     Debugger.Launch();
            // #endif
            //<docsnippet_startup>
            var host = new HostBuilder()
                //<docsnippet_configure_defaults>
                .ConfigureFunctionsWorkerDefaults()
                //</docsnippet_configure_defaults>
                //<docsnippet_dependency_injection>
                .ConfigureServices(s =>
                {
                    s.AddApplicationInsightsTelemetryWorkerService();
                    s.ConfigureFunctionsApplicationInsights();
                    s.AddSingleton<IHttpResponderService, DefaultHttpResponderService>();
                    s.Configure<LoggerFilterOptions>(options =>
                    {
                        // The Application Insights SDK adds a default logging filter that instructs ILogger to capture only Warning and more severe logs. Application Insights requires an explicit override.
                        // Log levels can also be configured using appsettings.json. For more information, see /azure-monitor/app/worker-service#ilogger-logs
                        LoggerFilterRule toRemove = options.Rules.FirstOrDefault(rule => rule.ProviderName
                            == "Microsoft.Extensions.Logging.ApplicationInsights.ApplicationInsightsLoggerProvider");

                        if (toRemove is not null)
                        {
                            options.Rules.Remove(toRemove);
                        }
                    });
                })
                //</docsnippet_dependency_injection>
                .Build();
            //</docsnippet_startup>

            //<docsnippet_host_run>
            await host.RunAsync();
            //</docsnippet_host_run>
        }
    }
}

This code requires using Microsoft.Extensions.DependencyInjection;.

Before calling Build() on the HostBuilder, you should:

• Call either ConfigureFunctionsWebApplication() if using ASP.NET Core integration or ConfigureFunctionsWorkerDefaults() otherwise. See HTTP trigger for details on these options.
  If you're writing your application using F#, some trigger and binding extensions require extra configuration. See the setup documentation for the Blobs extension, the Tables extension, and the Cosmos DB extension when you plan to use these extensions in an F# app.
• Configure any services or app configuration your project requires. See Configuration for details.
  If you're planning to use Application Insights, you need to call AddApplicationInsightsTelemetryWorkerService() and ConfigureFunctionsApplicationInsights() in the ConfigureServices() delegate. See Application Insights for details.

If your project targets .NET Framework 4.8, you also need to add FunctionsDebugger.Enable(); before creating the HostBuilder. It should be the first line of your Main() method. For more information, see Debugging when targeting .NET Framework.

The HostBuilder is used to build and return a fully initialized IHost instance, which you run asynchronously to start your function app.

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System.Linq;
using System.Threading.Tasks;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
using Microsoft.Extensions.Logging;

namespace FunctionApp
{
    class Program
    {
        static async Task Main(string[] args)
        {
            // #if DEBUG
            //     Debugger.Launch();
            // #endif
            //<docsnippet_startup>
            var host = new HostBuilder()
                //<docsnippet_configure_defaults>
                .ConfigureFunctionsWorkerDefaults()
                //</docsnippet_configure_defaults>
                //<docsnippet_dependency_injection>
                .ConfigureServices(s =>
                {
                    s.AddApplicationInsightsTelemetryWorkerService();
                    s.ConfigureFunctionsApplicationInsights();
                    s.AddSingleton<IHttpResponderService, DefaultHttpResponderService>();
                    s.Configure<LoggerFilterOptions>(options =>
                    {
                        // The Application Insights SDK adds a default logging filter that instructs ILogger to capture only Warning and more severe logs. Application Insights requires an explicit override.
                        // Log levels can also be configured using appsettings.json. For more information, see /azure-monitor/app/worker-service#ilogger-logs
                        LoggerFilterRule toRemove = options.Rules.FirstOrDefault(rule => rule.ProviderName
                            == "Microsoft.Extensions.Logging.ApplicationInsights.ApplicationInsightsLoggerProvider");

                        if (toRemove is not null)
                        {
                            options.Rules.Remove(toRemove);
                        }
                    });
                })
                //</docsnippet_dependency_injection>
                .Build();
            //</docsnippet_startup>

            //<docsnippet_host_run>
            await host.RunAsync();
            //</docsnippet_host_run>
        }
    }
}

Configuration

The ConfigureFunctionsWorkerDefaults method is used to add the settings required for the function app to run in an isolated worker process, which includes the following functionality:

• Default set of converters.
• Set the default JsonSerializerOptions to ignore casing on property names.
• Integrate with Azure Functions logging.
• Output binding middleware and features.
• Function execution middleware.
• Default gRPC support.

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System.Linq;
using System.Threading.Tasks;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
using Microsoft.Extensions.Logging;

namespace FunctionApp
{
    class Program
    {
        static async Task Main(string[] args)
        {
            // #if DEBUG
            //     Debugger.Launch();
            // #endif
            //<docsnippet_startup>
            var host = new HostBuilder()
                //<docsnippet_configure_defaults>
                .ConfigureFunctionsWorkerDefaults()
                //</docsnippet_configure_defaults>
                //<docsnippet_dependency_injection>
                .ConfigureServices(s =>
                {
                    s.AddApplicationInsightsTelemetryWorkerService();
                    s.ConfigureFunctionsApplicationInsights();
                    s.AddSingleton<IHttpResponderService, DefaultHttpResponderService>();
                    s.Configure<LoggerFilterOptions>(options =>
                    {
                        // The Application Insights SDK adds a default logging filter that instructs ILogger to capture only Warning and more severe logs. Application Insights requires an explicit override.
                        // Log levels can also be configured using appsettings.json. For more information, see /azure-monitor/app/worker-service#ilogger-logs
                        LoggerFilterRule toRemove = options.Rules.FirstOrDefault(rule => rule.ProviderName
                            == "Microsoft.Extensions.Logging.ApplicationInsights.ApplicationInsightsLoggerProvider");

                        if (toRemove is not null)
                        {
                            options.Rules.Remove(toRemove);
                        }
                    });
                })
                //</docsnippet_dependency_injection>
                .Build();
            //</docsnippet_startup>

            //<docsnippet_host_run>
            await host.RunAsync();
            //</docsnippet_host_run>
        }
    }
}

Having access to the host builder pipeline means that you can also set any app-specific configurations during initialization. You can call the ConfigureAppConfiguration method on HostBuilder one or more times to add the configurations required by your function app. To learn more about app configuration, see Configuration in ASP.NET Core.

These configurations apply to your function app running in a separate process. To make changes to the functions host or trigger and binding configuration, you still need to use the host.json file.

Dependency injection

Dependency injection is simplified when compared to .NET in-process functions, which requires you to create a startup class to register services.

For a .NET isolated process app, you use the .NET standard way of call ConfigureServices on the host builder and use the extension methods on IServiceCollection to inject specific services.

The following example injects a singleton service dependency:

.ConfigureServices(services =>
{
    services.AddSingleton<IHttpResponderService, DefaultHttpResponderService>();
})

This code requires using Microsoft.Extensions.DependencyInjection;. To learn more, see Dependency injection in ASP.NET Core.

Register Azure clients

Dependency injection can be used to interact with other Azure services. You can inject clients from the Azure SDK for .NET using the Microsoft.Extensions.Azure package. After installing the package, register the clients by calling AddAzureClients() on the service collection in Program.cs. The following example configures a named client for Azure Blobs:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Azure;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;

var host = new HostBuilder()
    .ConfigureFunctionsWorkerDefaults()
    .ConfigureServices((hostContext, services) =>
    {
        services.AddAzureClients(clientBuilder =>
        {
            clientBuilder.AddBlobServiceClient(hostContext.Configuration.GetSection("MyStorageConnection"))
                .WithName("copierOutputBlob");
        });
    })
    .Build();

host.Run();

The following example shows how we can use this registration and SDK types to copy blob contents as a stream from one container to another using an injected client:

using Microsoft.Extensions.Azure;
using Microsoft.Extensions.Logging;

namespace MyFunctionApp
{
    public class BlobCopier
    {
        private readonly ILogger<BlobCopier> _logger;
        private readonly BlobContainerClient _copyContainerClient;

        public BlobCopier(ILogger<BlobCopier> logger, IAzureClientFactory<BlobServiceClient> blobClientFactory)
        {
            _logger = logger;
            _copyContainerClient = blobClientFactory.CreateClient("copierOutputBlob").GetBlobContainerClient("samples-workitems-copy");
            _copyContainerClient.CreateIfNotExists();
        }

        [Function("BlobCopier")]
        public async Task Run([BlobTrigger("samples-workitems/{name}", Connection = "MyStorageConnection")] Stream myBlob, string name)
        {
            await _copyContainerClient.UploadBlobAsync(name, myBlob);
            _logger.LogInformation($"Blob {name} copied!");
        }

    }
}

The ILogger<T> in this example was also obtained through dependency injection, so it's registered automatically. To learn more about configuration options for logging, see Logging.

Middleware

The isolated worker model also supports middleware registration, again by using a model similar to what exists in ASP.NET. This model gives you the ability to inject logic into the invocation pipeline, and before and after functions execute.

The ConfigureFunctionsWorkerDefaults extension method has an overload that lets you register your own middleware, as you can see in the following example.

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System.Linq;
using Microsoft.Extensions.Hosting;

namespace CustomMiddleware
{
    public class Program
    {
        public static void Main()
        {
            //<docsnippet_middleware_register>
            var host = new HostBuilder()
                .ConfigureFunctionsWorkerDefaults(workerApplication =>
                {
                    // Register our custom middlewares with the worker

                    workerApplication.UseMiddleware<ExceptionHandlingMiddleware>();

                    workerApplication.UseMiddleware<MyCustomMiddleware>();

                    workerApplication.UseWhen<StampHttpHeaderMiddleware>((context) =>
                    {
                        // We want to use this middleware only for http trigger invocations.
                        return context.FunctionDefinition.InputBindings.Values
                                      .First(a => a.Type.EndsWith("Trigger")).Type == "httpTrigger";
                    });
                })
                .Build();
            //</docsnippet_middleware_register>
            host.Run();
        }
    }
}

The UseWhen extension method can be used to register a middleware that gets executed conditionally. You must pass to this method a predicate that returns a boolean value, and the middleware participates in the invocation processing pipeline when the return value of the predicate is true.

The following extension methods on FunctionContext make it easier to work with middleware in the isolated model.

This is an example of a middleware implementation that reads the HttpRequestData instance and updates the HttpResponseData instance during function execution:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System;
using System.Linq;
using System.Threading.Tasks;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Azure.Functions.Worker.Middleware;

namespace CustomMiddleware
{
    /// <summary>
    /// Middleware to stamp a response header on the result of http trigger invocation.
    /// </summary>
    //<docsnippet_middleware_example_stampheader>
    internal sealed class StampHttpHeaderMiddleware : IFunctionsWorkerMiddleware
    {
        public async Task Invoke(FunctionContext context, FunctionExecutionDelegate next)
        {
            var requestData = await context.GetHttpRequestDataAsync();

            string correlationId;
            if (requestData!.Headers.TryGetValues("x-correlationId", out var values))
            {
                correlationId = values.First();
            }
            else
            {
                correlationId = Guid.NewGuid().ToString();
            }

            await next(context);

            context.GetHttpResponseData()?.Headers.Add("x-correlationId", correlationId);
        }
    }
    //</docsnippet_middleware_example_stampheader>
}

This middleware checks for the presence of a specific request header(x-correlationId), and when present uses the header value to stamp a response header. Otherwise, it generates a new GUID value and uses that for stamping the response header. For a more complete example of using custom middleware in your function app, see the custom middleware reference sample.

Customizing JSON serialization

The isolated worker model uses System.Text.Json by default. You can customize the behavior of the serializer by configuring services as part of your Program.cs file. This section covers general-purpose serialization and will not influence HTTP trigger JSON serialization with ASP.NET Core integration, which must be configured separately.

The following example shows this using ConfigureFunctionsWebApplication, but it will also work for ConfigureFunctionsWorkerDefaults:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;

var host = new HostBuilder()
    .ConfigureFunctionsWebApplication((IFunctionsWorkerApplicationBuilder builder) =>
    {
        builder.Services.Configure<JsonSerializerOptions>(jsonSerializerOptions =>
        {
            jsonSerializerOptions.PropertyNamingPolicy = JsonNamingPolicy.CamelCase;
            jsonSerializerOptions.DefaultIgnoreCondition = JsonIgnoreCondition.WhenWritingNull;
            jsonSerializerOptions.ReferenceHandler = ReferenceHandler.Preserve;

            // override the default value
            jsonSerializerOptions.PropertyNameCaseInsensitive = false;
        });
    })
    .Build();

host.Run();

You might wish to instead use JSON.NET (Newtonsoft.Json) for serialization. To do this, you would install the Microsoft.Azure.Core.NewtonsoftJson package. Then, in your service registration, you would reassign the Serializer property on the WorkerOptions configuration. The following example shows this using ConfigureFunctionsWebApplication, but it will also work for ConfigureFunctionsWorkerDefaults:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;

var host = new HostBuilder()
    .ConfigureFunctionsWebApplication((IFunctionsWorkerApplicationBuilder builder) =>
    {
        builder.Services.Configure<WorkerOptions>(workerOptions =>
        {
            var settings = NewtonsoftJsonObjectSerializer.CreateJsonSerializerSettings();
            settings.ContractResolver = new CamelCasePropertyNamesContractResolver();
            settings.NullValueHandling = NullValueHandling.Ignore;

            workerOptions.Serializer = new NewtonsoftJsonObjectSerializer(settings);
        });
    })
    .Build();

host.Run();

Methods recognized as functions

A function method is a public method of a public class with a Function attribute applied to the method and a trigger attribute applied to an input parameter, as shown in the following example:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System;
using System.Collections.Generic;
using Azure.Storage.Queues.Models;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Logging;

namespace SampleApp
{
    public class QueueFunction
    {
        private readonly ILogger<QueueFunction> _logger;

        public QueueFunction(ILogger<QueueFunction> logger)
        {
            _logger = logger;
        }

        //<docsnippet_queue_output_binding>
        //<docsnippet_queue_trigger>
        [Function(nameof(QueueFunction))]
        [QueueOutput("output-queue")]
        public string[] Run([QueueTrigger("input-queue")] Album myQueueItem, FunctionContext context)
        //</docsnippet_queue_trigger>
        {
            // Use a string array to return more than one message.
            string[] messages = {
                $"Album name = {myQueueItem.Name}",
                $"Album songs = {myQueueItem.Songs.ToString()}"};

            _logger.LogInformation("{msg1},{msg2}", messages[0], messages[1]);

            // Queue Output messages
            return messages;
        }
        //</docsnippet_queue_output_binding>

        /// <summary>
        /// This function demonstrates binding to a single <see cref="QueueMessage"/>.
        /// </summary>
        [Function(nameof(QueueMessageFunction))]
        public void QueueMessageFunction([QueueTrigger("input-queue")] QueueMessage message)
        {
            _logger.LogInformation(message.MessageText);
        }

        /// <summary>
        /// This function demonstrates binding to a single <see cref="BinaryData"/>.
        /// </summary>
        [Function(nameof(QueueBinaryDataFunction))]
        public void QueueBinaryDataFunction([QueueTrigger("input-queue")] BinaryData message)
        {
            _logger.LogInformation(message.ToString());
        }
    }

    public class Album
    {
        public string Id { get; set; }

        public string Name { get; set; }

        public List<string> Songs { get; set; }
    }
}

The trigger attribute specifies the trigger type and binds input data to a method parameter. The previous example function is triggered by a queue message, and the queue message is passed to the method in the myQueueItem parameter.

The Function attribute marks the method as a function entry point. The name must be unique within a project, start with a letter and only contain letters, numbers, _, and -, up to 127 characters in length. Project templates often create a method named Run, but the method name can be any valid C# method name. The method must be a public member of a public class. It should generally be an instance method so that services can be passed in via dependency injection.

Function parameters

Here are some of the parameters that you can include as part of a function method signature:

• Bindings, which are marked as such by decorating the parameters as attributes. The function must contain exactly one trigger parameter.
• An execution context object, which provides information about the current invocation.
• A cancellation token, used for graceful shutdown.

Execution context

.NET isolated passes a FunctionContext object to your function methods. This object lets you get an ILogger instance to write to the logs by calling the GetLogger method and supplying a categoryName string. You can use this context to obtain an ILogger without having to use dependency injection. To learn more, see Logging.

Cancellation tokens

A function can accept a CancellationToken parameter, which enables the operating system to notify your code when the function is about to be terminated. You can use this notification to make sure the function doesn't terminate unexpectedly in a way that leaves data in an inconsistent state.

Cancellation tokens are supported in .NET functions when running in an isolated worker process. The following example raises an exception when a cancellation request is received:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Logging;

namespace Net7Worker
{
    public class EventHubCancellationToken
    {
        private readonly ILogger _logger;

        public EventHubCancellationToken(ILoggerFactory loggerFactory)
        {
            _logger = loggerFactory.CreateLogger<EventHubCancellationToken>();
        }

        // Sample showing how to handle a cancellation token being received
        // In this example, the function invocation status will be "Cancelled"
        //<docsnippet_cancellation_token_throw>
        [Function(nameof(ThrowOnCancellation))]
        public async Task ThrowOnCancellation(
            [EventHubTrigger("sample-workitem-1", Connection = "EventHubConnection")] string[] messages,
            FunctionContext context,
            CancellationToken cancellationToken)
        {
            _logger.LogInformation("C# EventHub {functionName} trigger function processing a request.", nameof(ThrowOnCancellation));

            foreach (var message in messages)
            {
                cancellationToken.ThrowIfCancellationRequested();
                await Task.Delay(6000); // task delay to simulate message processing
                _logger.LogInformation("Message '{msg}' was processed.", message);
            }
        }
        //</docsnippet_cancellation_token_throw>

        // Sample showing how to take precautionary/clean up actions if a cancellation token is received
        // In this example, the function invocation status will be "Successful"
        //<docsnippet_cancellation_token_cleanup>
        [Function(nameof(HandleCancellationCleanup))]
        public async Task HandleCancellationCleanup(
            [EventHubTrigger("sample-workitem-2", Connection = "EventHubConnection")] string[] messages,
            FunctionContext context,
            CancellationToken cancellationToken)
        {
            _logger.LogInformation("C# EventHub {functionName} trigger function processing a request.", nameof(HandleCancellationCleanup));

            foreach (var message in messages)
            {
                if (cancellationToken.IsCancellationRequested)
                {
                    _logger.LogInformation("A cancellation token was received, taking precautionary actions.");
                    // Take precautions like noting how far along you are with processing the batch
                    _logger.LogInformation("Precautionary activities complete.");
                    break;
                }

                await Task.Delay(6000); // task delay to simulate message processing
                _logger.LogInformation("Message '{msg}' was processed.", message);
            }
        }
        //</docsnippet_cancellation_token_cleanup>
    }
}

The following example performs clean-up actions when a cancellation request is received:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Logging;

namespace Net7Worker
{
    public class EventHubCancellationToken
    {
        private readonly ILogger _logger;

        public EventHubCancellationToken(ILoggerFactory loggerFactory)
        {
            _logger = loggerFactory.CreateLogger<EventHubCancellationToken>();
        }

        // Sample showing how to handle a cancellation token being received
        // In this example, the function invocation status will be "Cancelled"
        //<docsnippet_cancellation_token_throw>
        [Function(nameof(ThrowOnCancellation))]
        public async Task ThrowOnCancellation(
            [EventHubTrigger("sample-workitem-1", Connection = "EventHubConnection")] string[] messages,
            FunctionContext context,
            CancellationToken cancellationToken)
        {
            _logger.LogInformation("C# EventHub {functionName} trigger function processing a request.", nameof(ThrowOnCancellation));

            foreach (var message in messages)
            {
                cancellationToken.ThrowIfCancellationRequested();
                await Task.Delay(6000); // task delay to simulate message processing
                _logger.LogInformation("Message '{msg}' was processed.", message);
            }
        }
        //</docsnippet_cancellation_token_throw>

        // Sample showing how to take precautionary/clean up actions if a cancellation token is received
        // In this example, the function invocation status will be "Successful"
        //<docsnippet_cancellation_token_cleanup>
        [Function(nameof(HandleCancellationCleanup))]
        public async Task HandleCancellationCleanup(
            [EventHubTrigger("sample-workitem-2", Connection = "EventHubConnection")] string[] messages,
            FunctionContext context,
            CancellationToken cancellationToken)
        {
            _logger.LogInformation("C# EventHub {functionName} trigger function processing a request.", nameof(HandleCancellationCleanup));

            foreach (var message in messages)
            {
                if (cancellationToken.IsCancellationRequested)
                {
                    _logger.LogInformation("A cancellation token was received, taking precautionary actions.");
                    // Take precautions like noting how far along you are with processing the batch
                    _logger.LogInformation("Precautionary activities complete.");
                    break;
                }

                await Task.Delay(6000); // task delay to simulate message processing
                _logger.LogInformation("Message '{msg}' was processed.", message);
            }
        }
        //</docsnippet_cancellation_token_cleanup>
    }
}

Bindings

Bindings are defined by using attributes on methods, parameters, and return types. Bindings can provide data as strings, arrays, and serializable types, such as plain old class objects (POCOs). For some binding extensions, you can also bind to service-specific types defined in service SDKs.

For HTTP triggers, see the HTTP trigger section.

For a complete set of reference samples using triggers and bindings with isolated worker process functions, see the binding extensions reference sample.

Input bindings

A function can have zero or more input bindings that can pass data to a function. Like triggers, input bindings are defined by applying a binding attribute to an input parameter. When the function executes, the runtime tries to get data specified in the binding. The data being requested is often dependent on information provided by the trigger using binding parameters.

Output bindings

To write to an output binding, you must apply an output binding attribute to the function method, which defines how to write to the bound service. The value returned by the method is written to the output binding. For example, the following example writes a string value to a message queue named output-queue by using an output binding:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System;
using System.Collections.Generic;
using Azure.Storage.Queues.Models;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Logging;

namespace SampleApp
{
    public class QueueFunction
    {
        private readonly ILogger<QueueFunction> _logger;

        public QueueFunction(ILogger<QueueFunction> logger)
        {
            _logger = logger;
        }

        //<docsnippet_queue_output_binding>
        //<docsnippet_queue_trigger>
        [Function(nameof(QueueFunction))]
        [QueueOutput("output-queue")]
        public string[] Run([QueueTrigger("input-queue")] Album myQueueItem, FunctionContext context)
        //</docsnippet_queue_trigger>
        {
            // Use a string array to return more than one message.
            string[] messages = {
                $"Album name = {myQueueItem.Name}",
                $"Album songs = {myQueueItem.Songs.ToString()}"};

            _logger.LogInformation("{msg1},{msg2}", messages[0], messages[1]);

            // Queue Output messages
            return messages;
        }
        //</docsnippet_queue_output_binding>

        /// <summary>
        /// This function demonstrates binding to a single <see cref="QueueMessage"/>.
        /// </summary>
        [Function(nameof(QueueMessageFunction))]
        public void QueueMessageFunction([QueueTrigger("input-queue")] QueueMessage message)
        {
            _logger.LogInformation(message.MessageText);
        }

        /// <summary>
        /// This function demonstrates binding to a single <see cref="BinaryData"/>.
        /// </summary>
        [Function(nameof(QueueBinaryDataFunction))]
        public void QueueBinaryDataFunction([QueueTrigger("input-queue")] BinaryData message)
        {
            _logger.LogInformation(message.ToString());
        }
    }

    public class Album
    {
        public string Id { get; set; }

        public string Name { get; set; }

        public List<string> Songs { get; set; }
    }
}

Multiple output bindings

The data written to an output binding is always the return value of the function. If you need to write to more than one output binding, you must create a custom return type. This return type must have the output binding attribute applied to one or more properties of the class. The following example is an HTTP-triggered function using ASP.NET Core integration which writes to both the HTTP response and a queue output binding:

public class MultipleOutputBindings
{
    private readonly ILogger<MultipleOutputBindings> _logger;

    public MultipleOutputBindings(ILogger<MultipleOutputBindings> logger)
    {
        _logger = logger;
    }

    [Function("MultipleOutputBindings")]
    public MyOutputType Run([HttpTrigger(AuthorizationLevel.Function, "post")] HttpRequest req)
    {
        _logger.LogInformation("C# HTTP trigger function processed a request.");
        var myObject = new MyOutputType
        {
            Result = new OkObjectResult("C# HTTP trigger function processed a request."),
            MessageText = "some output"
        };
        return myObject;
    }

    public class MyOutputType
    {
        [HttpResult]
        public IActionResult Result { get; set; }

        [QueueOutput("myQueue")]
        public string MessageText { get; set; }
    }
}

When using custom return types for multiple output bindings with ASP.NET Core integration, you must add the [HttpResult] attribute to the property that provides the result. The HttpResult attribute is available when using SDK 1.17.3-preview2 or later along with version 3.2.0 or later of the HTTP extension and version 1.3.0 or later of the ASP.NET Core extension.

SDK types

For some service-specific binding types, binding data can be provided using types from service SDKs and frameworks. These provide more capability beyond what a serialized string or plain-old CLR object (POCO) can offer. To use the newer types, your project needs to be updated to use newer versions of core dependencies.

When testing SDK types locally on your machine, you also need to use Azure Functions Core Tools, version 4.0.5000 or later. You can check your current version using the func version command.

Each trigger and binding extension also has its own minimum version requirement, which is described in the extension reference articles. The following service-specific bindings provide SDK types:

¹ For output scenarios in which you would use an SDK type, you should create and work with SDK clients directly instead of using an output binding. See Register Azure clients for a dependency injection example.

² The Cosmos DB trigger uses the Azure Cosmos DB change feed and exposes change feed items as JSON-serializable types. The absence of SDK types is by-design for this scenario.

HTTP trigger

HTTP triggers allow a function to be invoked by an HTTP request. There are two different approaches that can be used:

• An ASP.NET Core integration model that uses concepts familiar to ASP.NET Core developers
• A built-in model, which doesn't require extra dependencies and uses custom types for HTTP requests and responses. This approach is maintained for backward compatibility with previous .NET isolated worker apps.

ASP.NET Core integration

This section shows how to work with the underlying HTTP request and response objects using types from ASP.NET Core including HttpRequest, HttpResponse, and IActionResult. This model isn't available to apps targeting .NET Framework, which should instead use the built-in model.

To enable ASP.NET Core integration for HTTP:

1. Add a reference in your project to the Microsoft.Azure.Functions.Worker.Extensions.Http.AspNetCore package, version 1.0.0 or later.

2. Update your project to use these specific package versions:

   • Microsoft.Azure.Functions.Worker.Sdk, version 1.11.0. or later
   • Microsoft.Azure.Functions.Worker, version 1.16.0 or later.

3. In your Program.cs file, update the host builder configuration to use ConfigureFunctionsWebApplication() instead of ConfigureFunctionsWorkerDefaults(). The following example shows a minimal setup without other customizations:

   using Microsoft.Extensions.Hosting;
   using Microsoft.Azure.Functions.Worker;
   
   var host = new HostBuilder()
       .ConfigureFunctionsWebApplication()
       .Build();
   
   host.Run();
   

4. Update any existing HTTP-triggered functions to use the ASP.NET Core types. This example shows the standard HttpRequest and an IActionResult used for a simple "hello, world" function:

   [Function("HttpFunction")]
   public IActionResult Run(
       [HttpTrigger(AuthorizationLevel.Anonymous, "get")] HttpRequest req)
   {
       return new OkObjectResult($"Welcome to Azure Functions, {req.Query["name"]}!");
   }
   

JSON serialization with ASP.NET Core integration

ASP.NET Core has its own serialization layer, and it is not affected by customizing general serialization configuration. To customize the serialization behavior used for your HTTP triggers, you need to include an .AddMvc() call as part of service registration. The returned IMvcBuilder can be used to modify ASP.NET Core's JSON serialization settings. The following example shows how to configure JSON.NET (Newtonsoft.Json) for serialization using this approach:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;

var host = new HostBuilder()
    .ConfigureFunctionsWebApplication()
    .ConfigureServices(services =>
    {
        services.AddApplicationInsightsTelemetryWorkerService();
        services.ConfigureFunctionsApplicationInsights();
        services.AddMvc().AddNewtonsoftJson();
    })
    .Build();
host.Run();

Built-in HTTP model

In the built-in model, the system translates the incoming HTTP request message into an HttpRequestData object that is passed to the function. This object provides data from the request, including Headers, Cookies, Identities, URL, and optionally a message Body. This object is a representation of the HTTP request but isn't directly connected to the underlying HTTP listener or the received message.

Likewise, the function returns an HttpResponseData object, which provides data used to create the HTTP response, including message StatusCode, Headers, and optionally a message Body.

The following example demonstrates the use of HttpRequestData and HttpResponseData:

// Copyright (c) .NET Foundation. All rights reserved.
// Licensed under the MIT License. See License.txt in the project root for license information.

using System.Net;
using Microsoft.Azure.Functions.Worker;
using Microsoft.Azure.Functions.Worker.Http;
using Microsoft.Extensions.Logging;

namespace SampleApp
{
    public static class HttpFunction
    {
        //<docsnippet_http_trigger>
        [Function(nameof(HttpFunction))]
        public static HttpResponseData Run([HttpTrigger(AuthorizationLevel.Anonymous, "get", "post", Route = null)] HttpRequestData req,
            FunctionContext executionContext)
        {
            //<docsnippet_logging>
            var logger = executionContext.GetLogger(nameof(HttpFunction));
            logger.LogInformation("message logged");
            //</docsnippet_logging>

            var response = req.CreateResponse(HttpStatusCode.OK);
            response.Headers.Add("Content-Type", "text/plain; charset=utf-8");
            response.WriteString("Welcome to .NET isolated worker !!");

            return response;
        }
        //</docsnippet_http_trigger>
    }
}

Logging

In .NET isolated, you can write to logs by using an ILogger<T> or ILogger instance. The logger can be obtained through dependency injection of an ILogger<T> or of an ILoggerFactory:

public class MyFunction {
    
    private readonly ILogger<MyFunction> _logger;
    
    public MyFunction(ILogger<MyFunction> logger) {
        _logger = logger;
    }
    
    [Function(nameof(MyFunction))]
    public void Run([BlobTrigger("samples-workitems/{name}", Connection = "")] string myBlob, string name)
    {
        _logger.LogInformation($"C# Blob trigger function Processed blob\n Name: {name} \n Data: {myBlob}");
    }

}

The logger can also be obtained from a FunctionContext object passed to your function. Call the GetLogger<T> or GetLogger method, passing a string value that is the name for the category in which the logs are written. The category is usually the name of the specific function from which the logs are written. To learn more about categories, see the monitoring article.

Use the methods of ILogger<T> and ILogger to write various log levels, such as LogWarning or LogError. To learn more about log levels, see the monitoring article. You can customize the log levels for components added to your code by registering filters:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
using Microsoft.Extensions.Logging;

var host = new HostBuilder()
    .ConfigureFunctionsWorkerDefaults()
    .ConfigureServices(services =>
    {
        // Registers IHttpClientFactory.
        // By default this sends a lot of Information-level logs.
        services.AddHttpClient();
    })
    .ConfigureLogging(logging =>
    {
        // Disable IHttpClientFactory Informational logs.
        // Note -- you can also remove the handler that does the logging: https://github.com/aspnet/HttpClientFactory/issues/196#issuecomment-432755765 
        logging.AddFilter("System.Net.Http.HttpClient", LogLevel.Warning);
    })
    .Build();

As part of configuring your app in Program.cs, you can also define the behavior for how errors are surfaced to your logs. By default, exceptions thrown by your code can end up wrapped in an RpcException. To remove this extra layer, set the EnableUserCodeException property to "true" as part of configuring the builder:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.Hosting;

var host = new HostBuilder()
    .ConfigureFunctionsWorkerDefaults(builder => {}, options =>
    {
        options.EnableUserCodeException = true;
    })
    .Build();

host.Run();

Application Insights

You can configure your isolated process application to emit logs directly to Application Insights. This behavior replaces the default behavior of relaying logs through the host, and is recommended because it gives you control over how those logs are emitted.

Install packages

To write logs directly to Application Insights from your code, add references to these packages in your project:

• Microsoft.Azure.Functions.Worker.ApplicationInsights, version 1.0.0 or later.
• Microsoft.ApplicationInsights.WorkerService.

You can run the following commands to add these references to your project:

dotnet add package Microsoft.ApplicationInsights.WorkerService
dotnet add package Microsoft.Azure.Functions.Worker.ApplicationInsights

Configure startup

With the packages installed, you must call AddApplicationInsightsTelemetryWorkerService() and ConfigureFunctionsApplicationInsights() during service configuration in your Program.cs file, as in this example:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
    
var host = new HostBuilder()
    .ConfigureFunctionsWorkerDefaults()
    .ConfigureServices(services => {
        services.AddApplicationInsightsTelemetryWorkerService();
        services.ConfigureFunctionsApplicationInsights();
    })
    .Build();

host.Run();

The call to ConfigureFunctionsApplicationInsights() adds an ITelemetryModule, which listens to a Functions-defined ActivitySource. This creates the dependency telemetry required to support distributed tracing. To learn more about AddApplicationInsightsTelemetryWorkerService() and how to use it, see Application Insights for Worker Service applications.

Managing log levels

The rest of your application continues to work with ILogger and ILogger<T>. However, by default, the Application Insights SDK adds a logging filter that instructs the logger to capture only warnings and more severe logs. If you want to disable this behavior, remove the filter rule as part of service configuration:

using Microsoft.Azure.Functions.Worker;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Hosting;
using Microsoft.Extensions.Logging;

var host = new HostBuilder()
    .ConfigureFunctionsWorkerDefaults()
    .ConfigureServices(services => {
        services.AddApplicationInsightsTelemetryWorkerService();
        services.ConfigureFunctionsApplicationInsights();
    })
    .ConfigureLogging(logging =>
    {
        logging.Services.Configure<LoggerFilterOptions>(options =>
        {
            LoggerFilterRule defaultRule = options.Rules.FirstOrDefault(rule => rule.ProviderName
                == "Microsoft.Extensions.Logging.ApplicationInsights.ApplicationInsightsLoggerProvider");
            if (defaultRule is not null)
            {
                options.Rules.Remove(defaultRule);
            }
        });
    })
    .Build();

host.Run();

Performance optimizations

This section outlines options you can enable that improve performance around cold start.

In general, your app should use the latest versions of its core dependencies. At a minimum, you should update your project as follows:

1. Upgrade Microsoft.Azure.Functions.Worker to version 1.19.0 or later.
2. Upgrade Microsoft.Azure.Functions.Worker.Sdk to version 1.16.4 or later.
3. Add a framework reference to Microsoft.AspNetCore.App, unless your app targets .NET Framework.

The following snippet shows this configuration in the context of a project file:

  <ItemGroup>
    <FrameworkReference Include="Microsoft.AspNetCore.App" />
    <PackageReference Include="Microsoft.Azure.Functions.Worker" Version="1.21.0" />
    <PackageReference Include="Microsoft.Azure.Functions.Worker.Sdk" Version="1.16.4" />
  </ItemGroup>

Placeholders

Placeholders are a platform capability that improves cold start for apps targeting .NET 6 or later. To use this optimization, you must explicitly enable placeholders using these steps:

1. Update your project configuration to use the latest dependency versions, as detailed in the previous section.

2. Set the WEBSITE_USE_PLACEHOLDER_DOTNETISOLATED application setting to 1, which you can do by using this az functionapp config appsettings set command:

   az functionapp config appsettings set -g <groupName> -n <appName> --settings 'WEBSITE_USE_PLACEHOLDER_DOTNETISOLATED=1'
   

   In this example, replace <groupName> with the name of the resource group, and replace <appName> with the name of your function app.

3. Make sure that the netFrameworkVersion property of the function app matches your project's target framework, which must be .NET 6 or later. You can do this by using this az functionapp config set command:

   az functionapp config set -g <groupName> -n <appName> --net-framework-version <framework>
   

   In this example, also replace <framework> with the appropriate version string, such as v8.0, according to your target .NET version.

4. Make sure that your function app is configured to use a 64-bit process, which you can do by using this az functionapp config set command:

   az functionapp config set -g <groupName> -n <appName> --use-32bit-worker-process false
   

Optimized executor

The function executor is a component of the platform that causes invocations to run. An optimized version of this component is enabled by default starting with version 1.16.2 of the SDK. No other configuration is required.

ReadyToRun

You can compile your function app as ReadyToRun binaries. ReadyToRun is a form of ahead-of-time compilation that can improve startup performance to help reduce the effect of cold starts when running in a Consumption plan. ReadyToRun is available in .NET 6 and later versions and requires version 4.0 or later of the Azure Functions runtime.

ReadyToRun requires you to build the project against the runtime architecture of the hosting app. If these are not aligned, your app will encounter an error at startup. Select your runtime identifier from this table:

¹ Only 64-bit apps are eligible for some other performance optimizations.

To check if your Windows app is 32-bit or 64-bit, you can run the following CLI command, substituting <group_name> with the name of your resource group and <app_name> with the name of your application. An output of "true" indicates that the app is 32-bit, and "false" indicates 64-bit.

 az functionapp config show -g <group_name> -n <app_name> --query "use32BitWorkerProcess"

You can change your application to 64-bit with the following command, using the same substitutions:

az functionapp config set -g <group_name> -n <app_name> --use-32bit-worker-process false`

To compile your project as ReadyToRun, update your project file by adding the <PublishReadyToRun> and <RuntimeIdentifier> elements. The following example shows a configuration for publishing to a Windows 64-bit function app.

<PropertyGroup>
  <TargetFramework>net8.0</TargetFramework>
  <AzureFunctionsVersion>v4</AzureFunctionsVersion>
  <RuntimeIdentifier>win-x64</RuntimeIdentifier>
  <PublishReadyToRun>true</PublishReadyToRun>
</PropertyGroup>

If you don't want to set the <RuntimeIdentifier> as part of the project file, you can also configure this as part of the publishing gesture itself. For example, with a Windows 64-bit function app, the .NET CLI command would be:

dotnet publish --runtime win-x64

In Visual Studio, the Target Runtime option in the publish profile should be set to the correct runtime identifier. When set to the default value of Portable, ReadyToRun isn't used.

Deploy to Azure Functions

When you deploy your function code project to Azure, it must run in either a function app or in a Linux container. The function app and other required Azure resources must exist before you deploy your code.

You can also deploy your function app in a Linux container. For more information, see Working with containers and Azure Functions.

Create Azure resources

You can create your function app and other required resources in Azure using one of these methods:

• Visual Studio: Visual Studio can create resources for you during the code publishing process.
• Visual Studio Code: Visual Studio Code can connect to your subscription, create the resources needed by your app, and then publish your code.
• Azure CLI: You can use the Azure CLI to create the required resources in Azure.
• Azure PowerShell: You can use Azure PowerShell to create the required resources in Azure.
• Deployment templates: You can use ARM templates and Bicep files to automate the deployment of the required resources to Azure. Make sure your template includes any required settings.
• Azure portal: You can create the required resources in the Azure portal.

Publish your application

After creating your function app and other required resources in Azure, you can deploy the code project to Azure using one of these methods:

• Visual Studio: Simple manual deployment during development.
• Visual Studio Code: Simple manual deployment during development.
• Azure Functions Core Tools: Deploy project file from the command line.
• Deployment templates: You can use ARM templates or Bicep files to automate package deployments.

For more information, see Deployment technologies in Azure Functions.

Deployment payload

Many of the deployment methods make use of a zip archive. If you are creating the zip archive yourself, it must follow the structure outlined in this section. If it does not, your app may experience errors at startup.

The deployment payload should match the output of a dotnet publish command, though without the enclosing parent folder. The zip archive should be made from the following files:

• .azurefunctions/
• extensions.json
• functions.metadata
• host.json
• worker.config.json
• Your project executable (a console app)
• Other supporting files and directories peer to that executable

These files are generated by the build process, and they are not meant to be edited directly.

When preparing a zip archive for deployment, you should only compress the contents of the output directory, not the enclosing directory itself. When the archive is extracted into the current working directory, the files listed above need to be immediately visible.

Deployment requirements

There are a few requirements for running .NET functions in the isolated worker model in Azure, depending on the operating system:

When you create your function app in Azure using the methods in the previous section, these required settings are added for you. When you create these resources by using ARM templates or Bicep files for automation, you must make sure to set them in the template.

Debugging

When running locally using Visual Studio or Visual Studio Code, you're able to debug your .NET isolated worker project as normal. However, there are two debugging scenarios that don't work as expected.

Remote Debugging using Visual Studio

Because your isolated worker process app runs outside the Functions runtime, you need to attach the remote debugger to a separate process. To learn more about debugging using Visual Studio, see Remote Debugging.

Debugging when targeting .NET Framework

If your isolated project targets .NET Framework 4.8, the current preview scope requires manual steps to enable debugging. These steps aren't required if using another target framework.

Your app should start with a call to FunctionsDebugger.Enable(); as its first operation. This occurs in the Main() method before initializing a HostBuilder. Your Program.cs file should look similar to this:

using System;
using System.Diagnostics;
using Microsoft.Extensions.Hosting;
using Microsoft.Azure.Functions.Worker;
using NetFxWorker;

namespace MyDotnetFrameworkProject
{
    internal class Program
    {
        static void Main(string[] args)
        {
            FunctionsDebugger.Enable();

            var host = new HostBuilder()
                .ConfigureFunctionsWorkerDefaults()
                .Build();

            host.Run();
        }
    }
}

Next, you need to manually attach to the process using a .NET Framework debugger. Visual Studio doesn't do this automatically for isolated worker process .NET Framework apps yet, and the "Start Debugging" operation should be avoided.

In your project directory (or its build output directory), run:

func host start --dotnet-isolated-debug

This starts your worker, and the process stops with the following message:

Azure Functions .NET Worker (PID: <process id>) initialized in debug mode. Waiting for debugger to attach...

Where <process id> is the ID for your worker process. You can now use Visual Studio to manually attach to the process. For instructions on this operation, see How to attach to a running process.

After the debugger is attached, the process execution resumes, and you'll be able to debug.

Preview .NET versions

Before a generally available release, a .NET version might be released in a Preview or Go-live state. See the .NET Official Support Policy for details on these states.

While it might be possible to target a given release from a local Functions project, function apps hosted in Azure might not have that release available. Azure Functions can only be used with Preview or Go-live releases noted in this section.

Azure Functions currently can be used with the following "Preview" or "Go-live" .NET releases:

¹ To successfully target .NET 9, your project needs to reference the 2.x versions of the core packages. If using Visual Studio, .NET 9 requires version 17.12 or later.

² .NET 9 is not yet supported on the Flex Consumption SKU.

See Supported versions for a list of generally available releases that you can use.

Using a preview .NET SDK

To use Azure Functions with a preview version of .NET, you need to update your project by:

1. Installing the relevant .NET SDK version in your development
2. Changing the TargetFramework setting in your .csproj file

When you deploy to your function app in Azure, you also need to ensure that the framework is made available to the app. During the preview period, some tools and experiences may not surface the new preview version as an option. If you do not see the preview version included in the Azure Portal, for example, you can use the REST API, Bicep templates, or the Azure CLI to configure the version manually.

az functionapp config set -g <groupName> -n <appName> --net-framework-version <framework>

az functionapp config set -g <groupName> -n <appName> --linux-fx-version "dotnet-isolated|<version>"

Considerations for using .NET preview versions

Keep these considerations in mind when using Functions with preview versions of .NET:

• When you author your functions in Visual Studio, you must use Visual Studio Preview, which supports building Azure Functions projects with .NET preview SDKs.

• Make sure you have the latest Functions tools and templates. To update your tools:

  1. Navigate to Tools > Options, choose Azure Functions under Projects and Solutions.
  2. Select Check for updates and install updates as prompted.

• During a preview period, your development environment might have a more recent version of the .NET preview than the hosted service. This can cause your function app to fail when deployed. To address this, you can specify the version of the SDK to use in global.json.

  1. Run the dotnet --list-sdks command and note the preview version you're currently using during local development.
  2. Run the dotnet new globaljson --sdk-version <SDK_VERSION> --force command, where <SDK_VERSION> is the version you're using locally. For example, dotnet new globaljson --sdk-version dotnet-sdk-8.0.100-preview.7.23376.3 --force causes the system to use the .NET 8 Preview 7 SDK when building your project.

Next steps