Frequently asked questions for Azure NAT Gateway

Azure NAT Gateway is a fully managed, highly resilient outbound connectivity solution for Azure virtual networks. To achieve secure and scalable outbound connectivity, attach a NAT gateway to subnets within a virtual network and to at least one static public IP address.

See Azure NAT Gateway limits.

No, a NAT gateway resource can't be used with more than one subscription at a time. For step-by-step guidance, see Create and configure a NAT gateway after a region move.

No, a NAT gateway can't be moved across subscriptions, regions, or resource groups. A new NAT gateway must be created for the other subscription, region, or resource group.

A NAT gateway provides outbound connectivity from a virtual network. Return traffic in direct response to an outbound flow can also pass through a NAT gateway. No inbound traffic directly from the internet can pass through a NAT gateway.

Network security group (NSG) flow logs can be used to monitor traffic flow from a resource in a subnet/virtual network by using a NAT gateway to go outbound.

Use Azure Security Center and follow the network protection recommendations to help secure your Azure network resources. Enable NSG flow logs and send the logs to an Azure Storage account for auditing. You can also send the flow logs to a Log Analytics workspace and then use Traffic Analytics to provide insights into traffic patterns in your Azure cloud. Some advantages of Traffic Analytics are the ability to visualize network activity, identify hot spots and security threats, understand traffic flow patterns, and pinpoint network misconfigurations.

To delete a NAT gateway resource, the resource must first be disassociated from the subnet. After the NAT gateway resource is disassociated from all subnets, it can be deleted. For guidance, see Remove a NAT gateway resource from an existing subnet and delete the resource.

No, a NAT gateway doesn't support IP fragmentation for Transmission Control Protocol (TCP) or User Datagram Protocol (UDP).

The SNAT Connection Count metric shows the number of new source network address translation (SNAT) connections made per second. The Total SNAT Connection Count metric shows the total number of active connections on a NAT gateway resource.

There's no SNAT port usage metric for a NAT gateway. Use the SNAT Connection Count and Total SNAT Connection Count metrics to help you evaluate the SNAT capacity of your NAT gateway resource.

NAT gateway metrics can be retrieved by using the metrics REST API. Alternatively, you can select Share and then Download to Excel from the NAT gateway metrics pane in the Azure portal.

No, NAT gateway metrics can't be exported by using diagnostic settings. NAT gateway metrics are multi dimensional. Diagnostic settings don't support the export of multi dimensional metrics.

A NAT gateway automatically connects outbound to the internet after being attached to a public IP address or prefix and a subnet. A NAT gateway takes priority over Azure Load Balancer with outbound rules, instance-level public IP addresses on virtual machines (VMs), and Azure Firewall for outbound connectivity.

No, there's no disruption in connections. Existing connections with the previous outbound service (Load Balancer, Azure Firewall, instance-level public IP addresses) continues to work until those connections close. After a NAT gateway is added to the subnet of the virtual network, all new connections use a NAT gateway for making outbound connections.

No, a public IP address of a NAT gateway can't connect directly to a private IP over the internet.

Any active connections associated with a public IP address terminate when the public IP address is removed. If the NAT gateway resource has multiple public IPs, new traffic is distributed among the assigned IPs.

There are a few possible reasons for why you could be seeing a different IP being used to connect outbound than the one associated to your NAT gateway. To help troubleshoot, refer to the Azure NAT Gateway connectivity troubleshooting guide.

A NAT gateway uses a subnet's system default internet path to route traffic to the internet. Traffic doesn't pass through a NAT gateway if a user-defined route is created to direct 0.0.0.0/0 traffic to the next hop type network virtual appliance (NVA) or a virtual network gateway.

No configuration on the subnet route table is required to start connecting outbound with a NAT gateway. When a NAT gateway is assigned to a subnet, the NAT gateway becomes the next hop type for all internet-destined traffic. Traffic can start connecting outbound to the internet as soon as the NAT gateway is assigned to a subnet and at least one public IP address.

Yes, a NAT gateway can be deployed without a public IP address or prefix and subnet. However, it's not operational until you attach at least one public IP address or prefix and a subnet.

Yes, public IP addresses on your NAT gateway are fixed and don't change.

A NAT gateway can use up to 16 public IP addresses. A NAT gateway can use any combination of public IP addresses and public IP prefixes totaling 16 addresses. A NAT gateway can support the following prefix sizes: /28 (16 addresses), /29 (8 addresses), /30 (4 addresses), and /31 (2 addresses).

No, a NAT gateway doesn't support IPv6 public IP addresses. You can, however, have a dual-stack configuration with a NAT gateway and a load balancer to provide IPv4 and IPv6 outbound connectivity. For more information, see Configure dual stack outbound connectivity with a NAT gateway and a public load balancer.

No, the address of an existing public IP can't be changed. If you need to change the public IP address on your NAT gateway, see Add or remove a public IP address for guidance.

Your subnet resources can use any of the public IP addresses attached to your NAT gateway for outbound connectivity. Each time a new outbound connection is made through a NAT gateway, the outbound public IP is selected at random.

No. IP assignment to specific subnets or VM instances in a NAT gateway-configured subnet isn't supported.

No, a NAT gateway can't be attached to multiple virtual networks.

Yes, a NAT gateway can be associated with up to 800 subnets in a virtual network. It isn't required to be associated with all subnets within a virtual network.

No, a NAT gateway can't be associated with a gateway subnet.

No, a NAT gateway operates based on the properties of the subnet, so multiple NAT gateways can't be attached to a single subnet.

Traffic from the spoke virtual networks can be routed to the centralized hub virtual network through an NVA or Azure Firewall. A NAT gateway can then provide outbound connectivity for all spoke virtual networks from the centralized hub network. To set up a NAT gateway in a hub-and-spoke architecture with NVAs, see Use a NAT gateway in a hub-and-spoke network. To use a NAT gateway with Azure Firewall in a hub-and-spoke setup, see Integrate a NAT gateway with Azure Firewall.

A NAT gateway can be zonal or placed in "no zone." For more information, see Azure NAT Gateway and availability zones. In addition:

• A no-zone NAT gateway is placed in a zone for you by Azure.
• A zonal NAT gateway is associated to a specific zone by the user when the NAT gateway is created.
• The zonal configuration of a NAT gateway can't be changed after deployment.

Zone-redundant public IP addresses and prefixes can be attached to either a no zone NAT gateway or a NAT gateway assigned to a specific availability zone. For more information, see Azure NAT Gateway and availability zones.

No, a NAT gateway is compatible with standard SKU resources. To learn more, see Azure NAT Gateway basics. Upgrade your basic load balancer and basic public IP address to standard to work with a NAT gateway. For more help:

• To upgrade a basic load balancer to standard, see Upgrade Azure public load balancer.
• To upgrade a basic public IP to standard, see Upgrade a public IP address.

For TCP connections, the idle timeout timer defaults to 4 minutes and is configurable up to 120 minutes. If you need to maintain long connection flows, use TCP keepalives instead of extending the idle timeout timer. TCP keepalives maintain active connections for a longer period.

The UDP idle timeout timer is set to 4 minutes and isn't configurable.

When a TCP/UDP connection is closed, the port is placed in a cool-down period before it can be reused to connect to the same destination endpoint. For more information, see SNAT port reuse timers. Connections going to a different destination can use a SNAT port right away. For more information, see SNAT with Azure NAT Gateway.

Yes, a NAT gateway can be used with Azure App Service to allow applications to direct outbound traffic to the internet from a virtual network. To use this integration between a NAT gateway and Azure App Service, regional virtual network integration must be enabled. For guidance on how to enable virtual network integration with a NAT gateway, see Azure NAT Gateway integration.

Yes. For more information about NAT gateway integration with Azure Kubernetes Service, see Managed NAT Gateway.

To manage an AKS cluster, you interact with its API server. When you create a non-private cluster that resolves to the API server's fully qualified domain name (FQDN), the API server is assigned a public IP address by default. After you attach a NAT Gateway to the subnets of your AKS cluster, NAT Gateway will be used to connect to the public IP of the AKS API server. Refer to Access an AKS API Server for additional information and design guidance.

Yes, a NAT gateway can be used with Azure Firewall. When Azure Firewall is used with a NAT gateway, it should be in a zonal configuration. A NAT gateway works with a zone-redundant firewall, but we don't recommend the deployment at this time. For more information about NAT gateway integration with Azure Firewall, see Scale SNAT ports with a NAT gateway.

Yes, the addition of a NAT gateway to a subnet with service endpoints doesn't affect the endpoints. Virtual Network service endpoints enable a more specific route for the destination Azure service traffic they represent. Traffic for the service endpoint traverses the Azure backbone instead of the internet. We recommend Private Link over service endpoints when you connect to Azure platform as a service (PaaS) directly from your Azure network.

Yes. If you enable secure cluster connectivity in your workspace, a NAT gateway can be used with Azure Databricks in one of two ways:

• If you use secure cluster connectivity with the default virtual network that Azure Databricks creates, Azure Databricks automatically creates a NAT gateway for outbound traffic from your workspace's subnets. The NAT gateway is created within the managed resource group that Azure Databricks manages. You can't modify this resource group or any resources provisioned within it.
• If you enable secure cluster connectivity on your workspace that uses virtual network injection, you can deploy a NAT gateway on both of the workspace's subnets to provide outbound connectivity. You can modify the configuration for customized outbound connectivity requirements in this case. For more information, see Secure cluster connectivity.