Design and architect Azure ExpressRoute for resiliency

Azure ExpressRoute is an essential hybrid connectivity service widely used for its low latency, resilience, high throughput private connectivity between your on-premises network and Azure workloads. It offers the ability to achieve reliability, resiliency, and disaster recovery in network connections between on-premises and Azure to ensure availability of business and mission-critical workloads. This capability also extends access to Azure resources in a scalable, and cost-effective way.

Network connections that are highly reliable, resilient, and available are fundamental to a well-structured system. Reliability consists of two principles: resiliency and availability. The goal of resiliency is to prevent failures and, in the event they do occur, to restore your applications to a fully operational state. The objective of availability is to provide consistent access to your application or workloads. It's important to proactively plan for reliability based on your business needs and application requirements.

Users of ExpressRoute rely on the availability and performance of edge sites, WAN, and availability zones to maintain their connectivity to Azure. However, these components or sites might experience failures due to various reasons, such as equipment malfunctioning, network disruptions, weather conditions, or natural disasters. Therefore, it's a joint responsibility between users and their cloud provider, when planning for reliability, resiliency, and availability.

Zonal resiliency for ExpressRoute

Azure regions are an integral part of your ExpressRoute design and resiliency strategy. These regions are geographical locations of data centers that host Azure services. Regions are interconnected through a dedicated low-latency network and are designed to be highly available, fault-tolerant, and scalable.

Azure offers several features to ensure regional resiliency. One such feature is availability zones. Availability zones protect applications and data from data center failures by spanning across multiple physical locations within a region. Regions and availability zones are central to your application design and resiliency strategy. By utilizing availability zones, you can achieve higher availability and resilience in your deployments. For more information, see Regions & availability zones.

We recommend deploying your ExpressRoute Virtual Network Gateways as zone redundant across availability zones within a region. These availability zones are separate physical locations with independent infrastructure (power, cooling, and networking). The purpose is to protect your on-premises network connectivity to Azure from zone level failures. Zone-redundant ExpressRoute gateways provide resiliency, scalability, and higher availability for accessing mission-critical services on Azure.

Equipment failures or disasters in regional and zonal data centers can affect ExpressRoute gateway deployments in virtual networks. If gateways aren't deployed as zone-redundant, such failures within an Azure data center can affect the ability for users to access their Azure workloads.

If you have an existing non-zone redundant ExpressRoute gateways, there's now the ability to migrate to an availability zone enabled gateway.

Recommendations

The following are recommendations to ensure high availability, resiliency, and reliability in your ExpressRoute network architecture:

• ExpressRoute circuit recommendations
• ExpressRoute Gateway recommendations
• Disaster recovery and high availability recommendations
• Monitoring and alerting recommendations

ExpressRoute circuit recommendations

Plan for ExpressRoute circuit or ExpressRoute Direct

During the initial planning phase, it's crucial to determine whether to configure an ExpressRoute circuit or an ExpressRoute Direct connection. An ExpressRoute circuit allows a private dedicated connection into Azure with the assistance of a connectivity provider. ExpressRoute Direct enables the extension of an on-premises network directly into the Azure network at a peering location. It's also necessary to identify the bandwidth requirement and the circuit SKU type requirement to meet your business needs.

Evaluate the resiliency of multi-site redundant ExpressRoute circuits

After deploying multi-site redundant ExpressRoute circuits with maximum resiliency, it's essential to ensure that on-premises routes are advertised over the redundant circuits to fully utilize the benefits of multi-site redundancy. To evaluate the resiliency and test the failover of redundant circuits and routes Learn more here.

Plan for active-active configuration

To improve resiliency and availability, Azure recommends operating both connections of an ExpressRoute circuit in active-active mode. By allowing two connections to operate in this mode, Azure load balances the network traffic across the connections on a per-flow basis.

Physical layer diversity

For better resiliency, plan to establish multiple paths between the on-premises edge and the peering locations (provider/Microsoft edge locations). This configuration can be achieved by utilizing different services providers or by routing through another peering location from the on-premises network. For high availability, it's essential to maintain the redundancy of the ExpressRoute circuit throughout the end-to-end network architecture. This includes maintaining redundancy within your on-premises network and redundancy within your service provider. Ensuring redundancy in these parts of your architecture means you shouldn't have a single point of failure.

Ensure BFD (Bidirectional Forwarding Detection) is enabled and configured

Enabling Bidirectional Forwarding Detection (BFD) over ExpressRoute can accelerate the link failure detection between the MSEE devices and the routers on which your ExpressRoute circuit is configured. Azure recommends configuring the Customer Premises Edge (CPE) devices with BFD. ExpressRoute can be configured over your edge routing devices or your Partner Edge routing devices. BFD is enabled by default on the MSEE devices on the Azure side.

ExpressRoute Gateway recommendations

Plan for Virtual Network Gateway

Create zone-redundant Virtual Network Gateways for greater resiliency and plan for Virtual Network Gateways in different regions for disaster recovery and high availability. When utilizing zone-redundant gateways, you can benefit from zone-resiliency for accessing your mission-critical and scalable services on Azure.

Migrate to zone-redundant ExpressRoute gateways

The guided gateway migration experience facilitates your migration from a Non-Az-Enabled SKU to an Az-Enabled SKU gateway. This feature allows for the creation of an additional virtual network gateway within the same gateway subnet. During the migration process, Azure transfers the control plane and data path configurations from your existing gateway to the new one.

Disaster recovery and high availability recommendations

Enable high availability and disaster recovery

To maximize availability, both the customer and service provider segments on your ExpressRoute circuit should be architected for availability & resiliency. For Disaster Recovery, plan for scenarios such as regional service outages due to natural calamities. Implement a robust disaster recovery design for multiple circuits configured through different peering locations in different regions. To learn more, see: Designing for disaster recovery.

Plan for geo-redundancy

For disaster recovery planning, we recommend setting up ExpressRoute circuits in multiple peering locations and regions. ExpressRoute circuits can be created in the same metropolitan area or different metropolitan areas, and different service providers can be used for diverse paths through each circuit. Geo-redundant ExpressRoute circuits are utilized to create a robust backend network connectivity for disaster recovery. To learn more, see Designing for high availability.

Virtual network peering for connectivity between virtual networks

Virtual Network (VNet) Peering provides a more efficient and direct method, enabling Azure services to communicate across virtual networks without the need of a virtual network gateway, extra hops, or transit over the public internet. To establish connectivity between virtual networks, VNet peering should be implemented for the best performance possible. For more information, see About Virtual Network Peering and Manage VNet peering.

Monitoring and alerting recommendations

Configure monitoring & alerting for ExpressRoute circuits

As a baseline, we recommend configuring Network Insights within Azure Monitor to view all ExpressRoute circuit metrics, including ExpressRoute Direct and Global Reach. Within the circuits card you can visualize topologies and dependencies for peerings, connections, and gateways. The insights available for circuits include availability, throughput, and packet drops.

Configure service health alerts for ExpressRoute circuit maintenance notifications

ExpressRoute uses Azure Service Health to notify you of planned and upcoming ExpressRoute circuit maintenance. With Service Health, you can view planned and past maintenance in the Azure portal along with configuring alerts and notifications that best suit your needs. In Service Health, you can see Planned & Past maintenance. You can also set alerts within Service Health to be notified of upcoming maintenance.

Configure connection monitor for ExpressRoute

Connection Monitor is a cloud-based network monitoring solution that monitors connectivity between Azure cloud deployments and on-premises locations (Branch offices, etc.). Connection Monitor is an agent-based solution.

Configure gateway health monitoring & alerting

Setup monitoring using Azure Monitor for ExpressRoute Gateway availability, performance, and scalability. When you deploy an ExpressRoute gateway, Azure manages the compute and functions of your gateway. There are multiple gateway metrics available to you to better understand the performance of your gateway.