Statement Execution API: Run SQL on warehouses

This tutorial shows you how to use the Databricks SQL Statement Execution API 2.0 to run SQL statements from Databricks SQL warehouses.

To view the Databricks SQL Statement Execution API 2.0 reference, see Statement Execution.

Before you begin

Before you start this tutorial, be sure that you have:

• Either Databricks CLI version 0.205 or above or curl, as follows:

  • The Databricks CLI is a command-line tool for sending and receiving Databricks REST API requests and responses. If you use Databricks CLI version 0.205 or above, it must be configured for authenticating with your Azure Databricks workspace. See Install or update the Databricks CLI and Authentication for the Databricks CLI.

    For example, to authenticate with Databricks personal access token authentication, create a personal access token as follows:

    1. In your Azure Databricks workspace, click your Azure Databricks username in the top bar, and then select Settings from the drop down.
    2. Click Developer.
    3. Next to Access tokens, click Manage.
    4. Click Generate new token.
    5. (Optional) Enter a comment that helps you to identify this token in the future, and change the token's default lifetime of 90 days. To create a token with no lifetime (not recommended), leave the Lifetime (days) box empty (blank).
    6. Click Generate.
    7. Copy the displayed token to a secure location, and then click Done.

    Note

    Be sure to save the copied token in a secure location. Do not share your copied token with others. If you lose the copied token, you cannot regenerate that exact same token. Instead, you must repeat this procedure to create a new token. If you lose the copied token, or you believe that the token has been compromised, Databricks strongly recommends that you immediately delete that token from your workspace by clicking the trash can (Revoke) icon next to the token on the Access tokens page.

    If you are not able to create or use tokens in your workspace, this might be because your workspace administrator has disabled tokens or has not given you permission to create or use tokens. See your workspace administrator or the following topics:

    • Enable or disable personal access token authentication for the workspace
    • Personal access token permissions

    And then to use the Databricks CLI to create an Azure Databricks configuration profile for your personal access token, do the following:

    Note

    The following procedure uses the Databricks CLI to create an Azure Databricks configuration profile with the name DEFAULT. If you already have a DEFAULT configuration profile, this procedure overwrites your existing DEFAULT configuration profile.

    To check whether you already have a DEFAULT configuration profile, and to view this profile's settings if it exists, use the Databricks CLI to run the command databricks auth env --profile DEFAULT.

    To create a configuration profile with a name other than DEFAULT, replace the DEFAULT part of --profile DEFAULT in the following databricks configure command with a different name for the configuration profile.

    1. Use the Databricks CLI to create an Azure Databricks configuration profile named DEFAULT that uses Azure Databricks personal access token authentication. To do this, run the following command:

       databricks configure --profile DEFAULT
       

    2. For the prompt Databricks Host, enter your Azure Databricks per-workspace URL, for example https://adb-1234567890123456.7.databricks.azure.cn.

    3. For the prompt Personal Access Token, enter the Azure Databricks personal access token for your workspace.

    In this tutorial's Databricks CLI examples, note the following:

    • This tutorial assumes that you have an environment variable DATABRICKS_SQL_WAREHOUSE_ID on your local development machine. This environment variable represents the ID of your Databricks SQL warehouse. This ID is the string of letters and numbers following /sql/1.0/warehouses/ in the HTTP path field for your warehouse. To learn how to get your warehouse's HTTP path value, see Get connection details for an Azure Databricks compute resource.
    • If you use the Windows Command shell instead of a command shell for Unix, Linux, or macOS, replace \ with ^, and replace ${...} with %...%.
    • If you use the Windows Command shell instead of a command shell for Unix, Linux, or macOS, in JSON document declarations, replace the opening and closing ' with ", and replace inner " with \".

  • curl is a command-line tool for sending and receiving REST API requests and responses. See also Install curl. Or, adapt this tutorial's curl examples for use with similar tools such as HTTPie.

    In this tutorial's curl examples, note the following:

    • Instead of --header "Authorization: Bearer ${DATABRICKS_TOKEN}", you can use a .netrc file. If you use a .netrc file, replace --header "Authorization: Bearer ${DATABRICKS_TOKEN}" with --netrc.
    • If you use the Windows Command shell instead of a command shell for Unix, Linux, or macOS, replace \ with ^, and replace ${...} with %...%.
    • If you use the Windows Command shell instead of a command shell for Unix, Linux, or macOS, in JSON document declarations, replace the opening and closing ' with ", and replace inner " with \".

    Also, for this tutorial's curl examples, this tutorial assumes you have the following environment variables on your local development machine:

    • DATABRICKS_HOST, representing the workspace instance name, for example adb-1234567890123456.7.databricks.azure.cn, for your Azure Databricks workspace.
    • DATABRICKS_TOKEN, representing an Azure Databricks personal access token for your Azure Databricks workspace user.
    • DATABRICKS_SQL_WAREHOUSE_ID, representing the ID of your Databricks SQL warehouse. This ID is the string of letters and numbers following /sql/1.0/warehouses/ in the HTTP path field for your warehouse. To learn how to get your warehouse's HTTP path value, see Get connection details for an Azure Databricks compute resource.

    Note

    As a security best practice, when you authenticate with automated tools, systems, scripts, and apps, Databricks recommends that you use personal access tokens belonging to service principals instead of workspace users. To create tokens for service principals, see Manage tokens for a service principal.

    To create an Azure Databricks personal access token, do the following:

    1. In your Azure Databricks workspace, click your Azure Databricks username in the top bar, and then select Settings from the drop down.
    2. Click Developer.
    3. Next to Access tokens, click Manage.
    4. Click Generate new token.
    5. (Optional) Enter a comment that helps you to identify this token in the future, and change the token's default lifetime of 90 days. To create a token with no lifetime (not recommended), leave the Lifetime (days) box empty (blank).
    6. Click Generate.
    7. Copy the displayed token to a secure location, and then click Done.

    Note

    Be sure to save the copied token in a secure location. Do not share your copied token with others. If you lose the copied token, you cannot regenerate that exact same token. Instead, you must repeat this procedure to create a new token. If you lose the copied token, or you believe that the token has been compromised, Databricks strongly recommends that you immediately delete that token from your workspace by clicking the trash can (Revoke) icon next to the token on the Access tokens page.

    If you are not able to create or use tokens in your workspace, this might be because your workspace administrator has disabled tokens or has not given you permission to create or use tokens. See your workspace administrator or the following topics:

    • Enable or disable personal access token authentication for the workspace
    • Personal access token permissions

    Warning

    Databricks strongly discourages hard-coding information into your scripts, as this sensitive information can be exposed in plain text through version control systems. Databricks recommends that you use approaches such as environment variables that you set on your development machine instead. Removing such hard-coded information from your scripts helps to make those scripts more portable as well.

• This tutorial assumes that you also have jq, a command-line processor for querying JSON response payloads, which the Databricks SQL Statement Execution API returns to you after each call that you make to the Databricks SQL Statement Execution API. See Download jq.

• You must have at least one table that you can execute SQL statements against. This tutorial is based on the lineitem table in the tpch schema (also known as a database) within the samples catalog. If you do not have access to this catalog, schema, or table from your workspace, substitute them throughout this tutorial with your own.

Step 1: Execute a SQL statement and save the data result as JSON

Run the following command, which does the following:

1. Uses the specified SQL warehouse, along with the specified token if you are using curl, to query for three columns from the first two rows of the lineitem table in the tcph schema within the samples catalog.
2. Saves the response payload in JSON format in a file named sql-execution-response.json within the current working directory.
3. Prints the contents of the sql-execution-response.json file.
4. Sets a local environment variable named SQL_STATEMENT_ID. This variable contains the ID of the corresponding SQL statement. You can use this SQL statement ID for getting information about that statement later as needed, which is demonstrated in Step 2. You can also view this SQL statement and get its statement ID from the query history section of the Databricks SQL console, or by calling the Query History API.
5. Sets an additional local environment variable named NEXT_CHUNK_EXTERNAL_LINK that contains an API URL fragment for getting the next chunk of JSON data. If the response data is too large, the Databricks SQL Statement Execution API provides the response in chunks. You can use this API URL fragment for getting the next chunk of data, which is demonstrated in Step 2. If there is no next chunk, then this environment variable is set to null.
6. Prints the values of the SQL_STATEMENT_ID and NEXT_CHUNK_INTERNAL_LINK environment variables.

Databricks CLI

databricks api post /api/2.0/sql/statements \
--profile <profile-name> \
--json '{
  "warehouse_id": "'"$DATABRICKS_SQL_WAREHOUSE_ID"'",
  "catalog": "samples",
  "schema": "tpch",
  "statement": "SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem WHERE l_extendedprice > :extended_price AND l_shipdate > :ship_date LIMIT :row_limit",
  "parameters": [
    { "name": "extended_price", "value": "60000", "type": "DECIMAL(18,2)" },
    { "name": "ship_date", "value": "1995-01-01", "type": "DATE" },
    { "name": "row_limit", "value": "2", "type": "INT" }
  ]
}' \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export SQL_STATEMENT_ID=$(jq -r .statement_id 'sql-execution-response.json') \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .result.next_chunk_internal_link 'sql-execution-response.json') \
&& echo SQL_STATEMENT_ID=$SQL_STATEMENT_ID \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request POST \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/ \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--header "Content-Type: application/json" \
--data '{
  "warehouse_id": "'"$DATABRICKS_SQL_WAREHOUSE_ID"'",
  "catalog": "samples",
  "schema": "tpch",
  "statement": "SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem WHERE l_extendedprice > :extended_price AND l_shipdate > :ship_date LIMIT :row_limit",
  "parameters": [
    { "name": "extended_price", "value": "60000", "type": "DECIMAL(18,2)" },
    { "name": "ship_date", "value": "1995-01-01", "type": "DATE" },
    { "name": "row_limit", "value": "2", "type": "INT" }
  ]
}' \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export SQL_STATEMENT_ID=$(jq -r .statement_id 'sql-execution-response.json') \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .result.next_chunk_internal_link 'sql-execution-response.json') \
&& echo SQL_STATEMENT_ID=$SQL_STATEMENT_ID \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

In the preceding request:

• Parameterized queries consist of each query parameter's name preceded by a colon (for example, :extended_price) with a matching name and value object in the parameters array. An optional type can also be specified, with the default value of STRING if not specified.

  Warning

  Databricks strongly recommends that you use parameters as a best practice for your SQL statements.

  If you use the Databricks SQL Statement Execution API with an application that generates SQL dynamically, this can result in SQL injection attacks. For example, if you generate SQL code based on a user's selections in a user interface and do not take appropriate measures, an attacker could inject malicious SQL code to change the logic of your initial query, thereby reading, changing, or deleting sensitive data.

  Parameterized queries help protect against SQL injections attacks by handling input arguments separately from the rest of your SQL code and interpreting these arguments as literal values. Parameters also help with code reusability.

• By default, any returned data is in JSON array format, and the default location for any of the SQL statement's data results is within the response payload. To make this behavior explicit, add "format":"JSON_ARRAY","disposition":"INLINE" to the request payload. If you attempt to return data results larger than 25 MiB in the response payload, a failure status is returned and the SQL statement is canceled. For data results larger than 25 MiB, you can use external links instead of trying to return it in the response payload, which is demonstrated in Step 3.

• The command stores the response payload's contents to a local file. Local data storage is not supported by the Databricks SQL Statement Execution API directly.

• By default, after 10 seconds, if the SQL statement has not yet finished executing through the warehouse, the Databricks SQL Statement Execution API returns only the SQL statement ID and its current status, instead of the statement's result. To change this behavior, add "wait_timeout" to the request and set it to "<x>s", where <x> can be between 5 and 50 seconds inclusive, for example "50s". To return the SQL statement ID and its current status immediately, set wait_timeout to 0s.

• By default, the SQL statement continues to run if the timeout period is reached. To cancel a SQL statement if the timeout period is reached instead, add "on_wait_timeout":"CANCEL" to the request payload.

• To limit the number of bytes returned, add "byte_limit" to the request and set it to the number of bytes, for example 1000.

• To limit the number of rows returned, instead of adding a LIMIT clause to statement, you can add "row_limit" to the request and set it to the number of rows, for example "statement":"SELECT * FROM lineitem","row_limit":2.

• If the result is larger than the specified byte_limit or row_limit, the truncated field is set to true in the response payload.

If the statement's result is available before the wait timeout ends, the response is as follows:

{
  "manifest": {
    "chunks": [
      {
        "chunk_index": 0,
        "row_count": 2,
        "row_offset": 0
      }
    ],
    "format": "JSON_ARRAY",
    "schema": {
      "column_count": 3,
      "columns": [
        {
          "name": "l_orderkey",
          "position": 0,
          "type_name": "LONG",
          "type_text": "BIGINT"
        },
        {
          "name": "l_extendedprice",
          "position": 1,
          "type_name": "DECIMAL",
          "type_precision": 18,
          "type_scale": 2,
          "type_text": "DECIMAL(18,2)"
        },
        {
          "name": "l_shipdate",
          "position": 2,
          "type_name": "DATE",
          "type_text": "DATE"
        }
      ]
    },
    "total_chunk_count": 1,
    "total_row_count": 2,
    "truncated": false
  },
  "result": {
    "chunk_index": 0,
    "data_array": [
      [
        "2",
        "71433.16",
        "1997-01-28"
      ],
      [
        "7",
        "86152.02",
        "1996-01-15"
      ]
    ],
    "row_count": 2,
    "row_offset": 0
  },
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "SUCCEEDED"
  }
}

If the wait timeout ends before the statement's result is available, the response looks like this instead:

{
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "PENDING"
  }
}

If the statement's result data is too large (for example in this case, by running SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem LIMIT 300000), the result data is chunked and looks like this instead. Note that "...": "..." indicates omitted results here for brevity:

{
  "manifest": {
    "chunks": [
      {
        "chunk_index": 0,
        "row_count": 188416,
        "row_offset": 0
      },
      {
        "chunk_index": 1,
        "row_count": 111584,
        "row_offset": 188416
      }
    ],
    "format":"JSON_ARRAY",
    "schema": {
      "column_count":3,
      "columns": [
        {
          "...": "..."
        }
      ]
    },
    "total_chunk_count": 2,
    "total_row_count": 300000,
    "truncated": false
  },
  "result": {
    "chunk_index": 0,
    "data_array": [
      [
        "2",
        "71433.16",
        "1997-01-28"
      ],
      [
        "..."
      ]
    ],
    "next_chunk_index": 1,
    "next_chunk_internal_link": "/api/2.0/sql/statements/00000000-0000-0000-0000-000000000000/result/chunks/1?row_offset=188416",
    "row_count": 188416,
    "row_offset": 0
  },
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "SUCCEEDED"
  }
}

Step 2: Get a statement's current execution status and data result as JSON

You can use a SQL statement's ID to get that statement's current execution status and, if the execution succeeded, that statement's result. If you forget the statement's ID, you can get it from the query history section of the Databricks SQL console, or by calling the Query History API. For example, you could keep polling this command, checking each time to see if the execution has succeeded.

To get a SQL statement's current execution status and, if the execution succeeded, that statement's result and an API URL fragment for getting any next chunk of JSON data, run the following command. This command assumes that you have an environment variable on your local development machine named SQL_STATEMENT_ID, which is set to the value of the ID of the SQL statement from the previous step. Of course, you can substitute ${SQL_STATEMENT_ID} in the following command with the hard-coded ID of the SQL statement.

Databricks CLI

databricks api get /api/2.0/sql/statements/${SQL_STATEMENT_ID} \
--profile <profile-name> \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .result.next_chunk_internal_link 'sql-execution-response.json') \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request GET \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/${SQL_STATEMENT_ID} \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .result.next_chunk_internal_link 'sql-execution-response.json') \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

If the NEXT_CHUNK_INTERNAL_LINK is set to a non-null value, you can use it to get the next chunk of data, and so on, for example with the following command:

Databricks CLI

databricks api get /${NEXT_CHUNK_INTERNAL_LINK} \
--profile <profile-name> \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .next_chunk_internal_link 'sql-execution-response.json') \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request GET \
https://${DATABRICKS_HOST}${NEXT_CHUNK_INTERNAL_LINK} \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export NEXT_CHUNK_INTERNAL_LINK=$(jq -r .next_chunk_internal_link 'sql-execution-response.json') \
&& echo NEXT_CHUNK_INTERNAL_LINK=$NEXT_CHUNK_INTERNAL_LINK

You can keep running the preceding command, over and over again, to get the next chunk, and so on. Note that as soon as the last chunk is fetched, the SQL statement is closed. After this closure, you cannot use that statement's ID to get its current status or to fetch any more chunks.

Step 3: Fetch large results using external links

This section demonstrates an optional configuration that uses the EXTERNAL_LINKS disposition to retrieve large data sets. The default location (disposition) for the SQL statement result data is within the response payload, but these results are limited to 25 MiB. By setting the disposition to EXTERNAL_LINKS, the response contains URLs you can use to fetch the chunks of the results data with standard HTTP. The URLs point to your workspace's internal DBFS, where the result chunks are temporarily stored.

The following command demonstrates using EXTERNAL_LINKS and Apache Arrow format. Use this pattern instead of the similar query demonstrated in Step 1:

Databricks CLI

databricks api post /api/2.0/sql/statements/ \
--profile <profile-name> \
--json '{
  "warehouse_id": "'"$DATABRICKS_SQL_WAREHOUSE_ID"'",
  "catalog": "samples",
  "schema": "tpch",
  "format": "ARROW_STREAM",
  "disposition": "EXTERNAL_LINKS",
  "statement": "SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem WHERE l_extendedprice > :extended_price AND l_shipdate > :ship_date LIMIT :row_limit",
  "parameters": [
    { "name": "extended_price", "value": "60000", "type": "DECIMAL(18,2)" },
    { "name": "ship_date", "value": "1995-01-01", "type": "DATE" },
    { "name": "row_limit", "value": "100000", "type": "INT" }
  ]
}' \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export SQL_STATEMENT_ID=$(jq -r .statement_id 'sql-execution-response.json') \
&& echo SQL_STATEMENT_ID=$SQL_STATEMENT_ID

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request POST \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/ \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--header "Content-Type: application/json" \
--data '{
  "warehouse_id": "'"$DATABRICKS_SQL_WAREHOUSE_ID"'",
  "catalog": "samples",
  "schema": "tpch",
  "format": "ARROW_STREAM",
  "disposition": "EXTERNAL_LINKS",
  "statement": "SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem WHERE l_extendedprice > :extended_price AND l_shipdate > :ship_date LIMIT :row_limit",
  "parameters": [
    { "name": "extended_price", "value": "60000", "type": "DECIMAL(18,2)" },
    { "name": "ship_date", "value": "1995-01-01", "type": "DATE" },
    { "name": "row_limit", "value": "100000", "type": "INT" }
  ]
}' \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json' \
&& export SQL_STATEMENT_ID=$(jq -r .statement_id 'sql-execution-response.json') \
&& echo SQL_STATEMENT_ID=$SQL_STATEMENT_ID

The response is as follows:

{
  "manifest": {
    "chunks": [
      {
        "byte_count": 2843848,
        "chunk_index": 0,
        "row_count": 100000,
        "row_offset": 0
      }
    ],
    "format": "ARROW_STREAM",
    "schema": {
      "column_count": 3,
      "columns": [
        {
          "name": "l_orderkey",
          "position": 0,
          "type_name": "LONG",
          "type_text": "BIGINT"
        },
        {
          "name": "l_extendedprice",
          "position": 1,
          "type_name": "DECIMAL",
          "type_precision": 18,
          "type_scale": 2,
          "type_text": "DECIMAL(18,2)"
        },
        {
          "name": "l_shipdate",
          "position": 2,
          "type_name": "DATE",
          "type_text": "DATE"
        }
      ]
    },
    "total_byte_count": 2843848,
    "total_chunk_count": 1,
    "total_row_count": 100000,
    "truncated": false
  },
  "result": {
    "external_links": [
      {
        "byte_count": 2843848,
        "chunk_index": 0,
        "expiration": "<url-expiration-timestamp>",
        "external_link": "<url-to-data-stored-externally>",
        "row_count": 100000,
        "row_offset": 0
      }
    ]
  },
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "SUCCEEDED"
  }
}

If the request times out, the response looks like this instead:

{
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "PENDING"
  }
}

To get that statement's current execution status and, if the execution succeeded, that statement's result, run the following command:

Databricks CLI

databricks api get /api/2.0/sql/statements/${SQL_STATEMENT_ID} \
--profile <profile-name> \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json'

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request GET \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/${SQL_STATEMENT_ID} \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json'

If the response is large enough (for example in this case, by running SELECT l_orderkey, l_extendedprice, l_shipdate FROM lineitem with no row limit), the response will have multiple chunks, as in the following example below. Note that "...": "..." indicates omitted results here for brevity:

{
  "manifest": {
    "chunks": [
      {
        "byte_count": 11469280,
        "chunk_index": 0,
        "row_count": 403354,
        "row_offset": 0
      },
      {
        "byte_count": 6282464,
        "chunk_index": 1,
        "row_count": 220939,
        "row_offset": 403354
      },
      {
        "...": "..."
      },
      {
        "byte_count": 6322880,
        "chunk_index": 10,
        "row_count": 222355,
        "row_offset": 3113156
      }
    ],
    "format":"ARROW_STREAM",
    "schema": {
      "column_count": 3,
      "columns": [
        {
          "...": "..."
        }
      ]
    },
    "total_byte_count": 94845304,
    "total_chunk_count": 11,
    "total_row_count": 3335511,
    "truncated": false
  },
  "result": {
    "external_links": [
      {
        "byte_count": 11469280,
        "chunk_index": 0,
        "expiration": "<url-expiration-timestamp>",
        "external_link": "<url-to-data-stored-externally>",
        "next_chunk_index": 1,
        "next_chunk_internal_link": "/api/2.0/sql/statements/00000000-0000-0000-0000-000000000000/result/chunks/1?row_offset=403354",
        "row_count": 403354,
        "row_offset": 0
      }
    ]
  },
  "statement_id": "00000000-0000-0000-0000-000000000000",
  "status": {
    "state": "SUCCEEDED"
  }
}

To download the stored content's results, you can run the following curl command, using the URL in the external_link object and specifying where you want to download the file. Do not include your Azure Databricks token in this command:

curl "<url-to-result-stored-externally>" \
--output "<path/to/download/the/file/locally>"

To download a specific chunk of a streamed content's results, you can use one of the following:

• The next_chunk_index value from the response payload for the next chunk (if there is a next chunk).
• One of the chunk indexes from the response payload's manifest for any available chunk if there are multiple chunks.

For example, to get the chunk with a chunk_index of 10 from the previous response, run the following command:

Databricks CLI

databricks api get /api/2.0/sql/statements/${SQL_STATEMENT_ID}/result/chunks/10 \
--profile <profile-name> \
> 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json'

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request GET \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/${SQL_STATEMENT_ID}/result/chunks/10 \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}" \
--output 'sql-execution-response.json' \
&& jq . 'sql-execution-response.json'

To download the stored chunk, use the URL in the external_link object.

For more information about the Apache Arrow format, see:

• IPC Streaming Format
• Writing and Reading Streaming Format
• Using streams

Step 4: Cancel a SQL statement's execution

If you need to cancel a SQL statement that has not yet succeeded, run the following command:

Databricks CLI

databricks api post /api/2.0/sql/statements/${SQL_STATEMENT_ID}/cancel \
--profile <profile-name> \
--json '{}'

Replace <profile-name> with the name of your Azure Databricks configuration profile for authentication.

curl

curl --request POST \
https://${DATABRICKS_HOST}/api/2.0/sql/statements/${SQL_STATEMENT_ID}/cancel \
--header "Authorization: Bearer ${DATABRICKS_TOKEN}"

Security best practices

The Databricks SQL Statement Execution API increases the security of data transfers by using end-to-end transport layer security (TLS) encryption and short-lived credentials such as SAS tokens.

There are several layers in this security model. At the transport layer, it is only possible to call the Databricks SQL Statement Execution API by using TLS 1.2 or above. Also, callers of the Databricks SQL Statement Execution API must be authenticated with a valid Azure Databricks personal access token, or Microsoft Entra ID (formerly Azure Active Directory) token that maps to a user who has the entitlement to use Databricks SQL. This user must have CAN USE access for the specific SQL warehouse that is being used, and access can be restricted with IP access lists. This applies to all requests to the Databricks SQL Statement Execution API. Furthermore, for executing statements, the authenticated user must have permission to the data objects (such as tables, views, and functions) that are used in each statement. This is enforced by existing access control mechanisms in Unity Catalog or by using table ACLs. (See Data governance with Unity Catalog for more details.) This also means that only the user who executes a statement can make fetch requests for the statement's results.

Databricks recommends the following security best practices whenever you use the Databricks SQL Statement Execution API along with the EXTERNAL_LINKS disposition to retrieve large data sets:

• Remove the Databricks authorization header for Azure storage requests
• Protect SAS URLs and SAS tokens

The EXTERNAL_LINKS disposition can be disabled upon request by creating a support case. To make this request, contact your Azure Databricks account team.

Remove the Databricks authorization header for Azure storage requests

All calls to the Databricks SQL Statement Execution API that use curl must include an Authorization header that contains Azure Databricks access credentials. Do not include this Authorization header whenever you download data from Azure storage. This header is not required and might unintentionally expose your Azure Databricks access credentials.

Protect SAS URLs and SAS tokens

Whenever you use the EXTERNAL_LINKS disposition, a short-lived SAS URL is generated, which the caller can use to download the results directly from Azure storage by using TLS. As a short-lived SAS token is embedded within this SAS URL, you should protect both the SAS URL and SAS token.